Free strawberry shortcake games and coloring pages
Posted on by
Published at Monday, 17 February 2020.
Preparation, the key to a successful paint job is to take the correct steps when preparing the job. Preparation for this article, has two parts, the first part is wall prep. The walls you are going to paint may have nail holes or imperfections that need to be filled before you paint. The proper way to fill them, if they are smaller is with water putty, by simply forcing a little bit of the putty in the hole and breaking it off flush with the surface. For larger depressions, use a drywall compound or spackle, which may require a second application to fully fill the indentation and make the repair/"patch" flush with the wall.
Acrylic is the second new name for magic in paints. This is also a plastic-in-water. Solid acrylic you know as the beautiful, glasslike Plexiglas and Lucite.
There are two bases of paint for your house: solvent-based (oil or alkyd) and water-based (latex). Oil-based paints dry slow - usually taking up to 24 hours. The best clean up for an oil-based paint is turpentine or paint thinner. Latex paints' advantage is that it dries relatively fast, but it is not desirable in hot weather or direct sunshine. The best clean up for latex paints requires just soap and water. So if you are painting the inside of your house, it is recommended to use water-based paints, while solvent-based paints are suggested for painting the exterior of your house.
Step four: the key to a finished looking painting is to build it just like a house...and by that I mean layers. Paint it in the reverse order in which the eye sees it to make it three-dimensional. By this I mean paint what's farthest from the eye first, and build layer upon layer towards the eye. In other words, do the background first because it should be the farthest from the eye, then add the objects on top of that, and then add the shadows to complete the look. Ultimately it's common sense. If you paint a bowl of fruit, the bowl and fruit need to sit on top of that background, much as it would in real life.
The first thing you need to do is clean your baseboards, doors, and wood work with a damp rag. Yes, your baseboards are that dirty. Now comes the time consuming process of taping off. This is a step that is skipped by most do it your self people and let me tell you it shows. Like I mentioned before a paint job is only as good as the straightness off it's lines don't cheat yourself here. Buy low stick professional painters tape and allow the walls to properly dry before you apply. Take your time as this process cannot be rushed through, but will give professional looking results. If you have carpet use 2 inch regular painters tape and tuck it in real good where the carpet meets the baseboard. Remove door hardware it takes two seconds and failure to do so will only slow you down in the long run. Open the windows and break out any fans as painting with oil based paint comes with paint fumes.
Brass lighting fixtures and andirons may be polished and kept bright by coating with metal lacquers. The lacquers, held in cans under pressure, may be sprayed directly from the container. Old-fashioned or unattractive lighting fixtures may be painted with ceiling or wall paint to harmonize with the surrounding surfaces.
Go for good coverage Look at the figures per litre not for the whole can; 12sq m per litre is average. Coverability varies between brands, making the difference between needing two or three coats. You will generally find more pigment in premium paints, giving a greater depth of colour.