Note: How to use an airless paint sprayer. I'm sure the guy at the rental store showed you how to use the airless (typically with his limited experience of actually painting a house), so hopefully I can offer you a couple new ideas on how to paint your home using an airless paint sprayer. When you first get the airless home, set it in the middle of the area that you would like to start painting. Typically the length of the hose is around 50'. Stretch out the hose prior to painting so that you don't have to worry about unraveling it while you are painting on a ladder. It is a good idea to have a 100' extension cord so that you can bring the airless anywhere you wish to paint without any restrictions. Tip: before you plug in the airless into the extension cord, MAKE SURE THE AIRLESS IS OFF! You don't want the airless to start pumping without paint! Now, when you go to set up the airless, before you turn it on, it's a good rule of thumb to have a second empty bucket next to your bucket of paint. I'll explain why in a second. Place both buckets side by side and place the intake hose (with the wire mesh filter end) into your 5 gallon bucket of paint while the primer hose (usually a lot smaller, about the size of a pencil'ish) is placed in the empty bucket of paint. Before you turn on the machine make sure that the airless is set to prime the machine first. There is a primer valve that you can rotate between prime and paint. A good way to see if the valve is set to prime or paint is to try this little test prior to turning the machine on. While turning the valve clockwise a couple times you will notice that the valve handle will separate from the machine in one position (leaving a slight crack between the valve and machine) while the other position the valve is close to the machine. The position in which the valve is separated from the machine is considered the primer position. Do this multiple times to see what I'm talking about. Don't worry if you keep on spinning the valve, you can spin it a million times in one direction and it won't hurt it. OK, let's get started. Step one...supplies. You need a flat brush, a fan, a small detail brush and a couple of Filberts. A filbert is a rounded edge brush that lets you maneuver the paint easily without going outside the edges. Ultimately buy brushes that you like though, and make them work. Fans allow you to blend, for example. I use fans a lot and it's how I graduate color throughout my images. Everything I paint is by hand....no airbrushing or assistants. I want it to be an expression of me and nobody else. You also need an oil painting medium to mix with the oil paint to make it more fluid, and to speed or slow the drying process. Whichever you prefer. Go to the art store and don't be afraid to ask for help....they'll love helping you! A medium is merely an additive liquid which increases gloss, makes it flow easily, preserves the finish over time, keeps it from yellowing. I personally love Galkyd and Galkyd Lite. If that isn't available, buy a medium that looks like liquid amber and is kind of thick. Don't buy watery looking mediums....too hard to work with. Remove side view mirrors (unless they're to be body color) as well as exterior door handles and locks. This will take some extra time because you need to remove the interior door panels to get these off, but it's worth it. Head lights, tail lights, marker lights and license plates should come off too, but you'll need them in place to drive to the paint shop. So bring some tools so you can quickly take these off once you arrive. Depending on the year Mustang you can just take off the chrome bezels or rings. The shop can then easily mask the headlight or tail light itself and still get plenty of paint around the edges.
Mewar School of Painting: These represent hunting scenes which are painted on cloth and handmade paper using stone colors SECONDARY COLORS. When you mix two primary colors together, you get a secondary color. The secondary colors are orange, green and violet. Orange is made by mixing red with yellow. Green is made by mixing blue and yellow. Violet is made my mixing blue with red. INTERIOR PAINTING. If you want to alter your room's ambience, painting it is a great option. When interior painting, use paints that are quicker to dry and does not have a strong odor that lingers around where your kids can smell it. Another idea keeping Paint Brush moist until the next paint coat is applied (but not leaving for extended periods) is leaving Brush in container, wrapping top with plastic, sticking handle out the top, and taping around the can. This resembles the Maxwell House Coffee Container mentioned earlier. If plastic and masking tape is still not available, and time between coats is not very long, take that sopping wet rag, draping over the top of paint bucket with Paint Brush still in it. This technique works best when using Latex waterborne paints.